Choosing a lash adhesive by set time, not by brand

A lash adhesive is not a brand, it is a time. It sets on contact with the moisture in the air, and everything that decides your lashing day sits in three numbers: set time, drying speed, and how long you have before a drop stops working at all.

The three times on a spec sheet

Set time is the gap between dipping the lash and it holding. A fast adhesive (one second or less) asks for a sure hand and tight placement. A slower one (two to three seconds) gives you room to place a lash and nudge it, which suits fan-by-fan volume work.

Drying speed is how fast the drop firms up on the palette. It decides how long you can work before you place a fresh drop.

Working time is the point past which the drop on the palette is no longer usable. A drop left too long goes stringy: it pulls, stops holding, and is almost always the real reason a set sheds early — not the adhesive in general.

Room humidity and temperature

The same adhesive behaves differently at 30% humidity and at 60%. The damper the air, the faster the cure — sometimes too fast for a beginner's hand. Match your choice to the room you actually work in, and write down the room's temperature on a day a reference served you well: that note is worth more than a review.

Storing at the counter

Lash adhesives are kept closed, away from light and heat. An opened bottle keeps less long than a sealed one, and a bottle left in summer sun degrades without the label changing. Date the bottle when you open it, on a strip of tape if you need one, and keep refills sealed until the day you need them.

What we will not say

We do not sort adhesives by skin type and make no claim of that kind: that is not a product page's job. Each reference's sheet gives its times and its working conditions. For a question about one reference, write to us — we know the batches on the shelf, and that is what we can tell you honestly.